| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 1year |
|
Still deciding? Get samples of US$ 1170/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
1.CHC-1000S is a capacitive distance sensor and controller (hereinafter referred to as CHC-1000S). During laser cutting, due to factors such as unevenness of the workpiece and high-pressure gas injection during cutting, the distance between the nozzle and the workpiece surface is not constant, which will have a negative impact on the cutting effect and even damage the nozzle.
2.The CHC-1000S distance adjustment box can maintain a constant distance between the nozzle and the surface of the workpiece during high-speed laser cutting, protect the nozzle from colliding with the workpiece, and greatly improve the cutting effect. The capacitance sensor on the cutting head can detect the distance between the nozzle and the surface of the workpiece. It is sent to the adjustment box for processing through a preamplifier, and the output signal is sent to the servo controller to control the Z-axis.
3.The CHC-1000S distance adjustment box can serve as a controller to output control voltage or as a distance control box
The measurement system outputs a distance signal, which depends on the selected mode, sensor control mode, and distance measurement
System Mode
Product technical parameters
| Product model: | CHC-1000S |
| Power supply | DC24V, 2A |
| Working environment | Temperature 0~65 ° C |
| Control motor type | None |
| Maximum speed | None |
| Sampling rate | 1000Hz |
| Maximum acceleration | None |
Product performance
1. The capacitance sampling rate is 1000 times per second.
2. Static measurement accuracy of 0.001 millimeters.
3. The height measurement range is 0-25 millimeters.
4.When the length of the amplifier signal transmission cable reaches 100 meters, the signal does not decay and has strong anti-interference ability.
5. Support network communication, USB drive upgrade, and online network firmware upgrade.
6. Support jitter suppression function, which can effectively suppress jitter caused by blowing air and scum.
7. It can adapt to any cutting head and nozzle, with adaptive capacitance parameters.
8. Support collision alarm, nozzle electrode loss detection alarm, sensor disconnection alarm.
9. Supports 1-point, 2-point, and 16 point capacitance calibration, and displays the calibrated curve.
10. Support real-time calibration of capacitors, which can effectively solve the impact of temperature and other factors on capacitive sensors.
11.16 bit DA output, output voltage (± 10V) signal in sensor control mode, or distance measurement A linear altitude signal with an output voltage of 0-10V in the measurement mode, with an update cycle of 1000 times per second.
12.14 bit AD input is used to detect external analog voltage signals (0V-10V) and adjust the stationary distance in real time.
13. Supports oscilloscope function and can monitor changes in capacitive sensors in real time.
14. Supports diagnostic testing and can detect real-time changes in AD/DA and IO.
15. Supports EtherCAT bus communication (optional).
){kind=link}