Fangling Controller Flmc F-2100A for Plasma Cutter

• Cutting Material: Carbon Steel, Aluminum, Stainless Steel
• Automatic Grade: Automatic
• Power Source: Electric
• Cutting Mode: Plasma Cutting
• Transport Package: Export Packing
• Specification: 440*370*410mm
• Model NO.: FLMC F-2100A/B
• Trademark: TC
• Origin: Wuxi
• HS Code: 8537101901
• Production Capacity: 50000PCS/Year

Product Description

Product Description

system features

The system upgrade adopts the u-disk upgrade method, which is convenient, practical and provides a lifetime upgrade service
Parameter backup and parameter restore
Support oxygen gas, plasma, powder spraying and demonstration 4 modes
Oxygen gas and plasma IO are controlled separately
Oxygen gas is automatically raised, two stage preheat, three stage perforation
Plasma arc pressure feedback, positioning feedback, corner automatically closed arc pressure adjustment
Support edge cutting, for thicker steel plate can reduce preheating time
According to the thickness of the steel plate, the speed can be automatically limited at the corner, effectively preventing overburning
Manually select the start line or select the punch point
Dynamic/static machining graphics display, graphics zoom in/out, dynamic tracking of cutting points in enlarged states
With power off, breakpoint protection memory function
The function of "offset cutting" can avoid the plate waste caused by the wrong calculation of discharge
Can set different management authority and corresponding password, maintain the rights and interests of equipment manufacturers
Support P2P mode or BCD (8421) and serial port RS232 mode remote control
Support laser point-to-point function
Support the plasma dynamic perforation function
Processing pieces, running time, perforation times and other information statistics

Technical indicators

Number of control shafts: 2-axis linkage (customizable 3-axis or 4-axis)
Control accuracy: plus or minus 0.001mm
Coordinate range: plus or minus 999.99mm
Maximum pulse frequency: 200KHz; Maximum speed: 15m/min
Maximum number of program lines: 80,000
Maximum single program: 4M
Time resolution: 10ms
System working power supply: DC +24V DC power input, power greater than 80W.
System working conditions: temperature 10 ºC to + 60 ºC; Relative humidity 0-95% does not coagulate
Drive arc voltage to increase the maximum power of the motor: 45W. If more power is needed, the maximum capacity can be selected to 200W.
Number of control shafts: 2-axis linkage (customizable 3-axis or 4-axis)
Control accuracy: plus or minus 0.001mm
Coordinate range: plus or minus 999.99mm
Maximum pulse frequency: 200KHz; Maximum speed: 15m/min
Maximum number of program lines: 80,000
Maximum single program: 4M
Time resolution: 10ms
System working power supply: DC +24V DC power input, power greater than 80W.
System working conditions: temperature 10 ºC to + 60 ºC; Relative humidity 0-95% does not coagulate
Drive arc voltage to increase the maximum power of the motor: 45W. If more power is needed, the maximum capacity can be selected to 200W.